FRANKLIN
CELLTRON GENSTART
CELLTRON™ 젠스타트 배터리 테스터는 발전기/차량 시동 배터리 분석을 제공하여 발전기 시동 배터리의 상태를 신속하게 파악합니다. 비중 테스트 대신 NFPA 규정 준수를 위한 이상적인 테스터입니다.
-
GENERATOR POWER ASSURANCE
Assure that your battery is powered and ready to start a generator in the case of an outage.
KEY ADVANTAGESNFPA-110 COMPLIANCE
An easy and economical means to execute routine testing that meets NFPA-110 standards requiring routine battery testing for emergency and standby power.
ALL-IN-ONE HARDWARE
The handheld unit includes a large back-lit screen, hard keypad for easy gloved use, integrated thermal printer, integrated SD memory card reader, infrared temperature sensor, and quick connect 10' clamps.
ACCURATE CONDUCTANCE TESTING
Utilizes enhanced conductance technology that correlates the battery test output results to the selected engine start battery rating under test, executing a conductance test with the battery results matching the selected battery rating set by the user.
SIMPLIFIED TESTING
With the streamlined user interface and testing procedure, the user simply selects the battery type and desired rating, and the tester delivers results including battery state of health and state of charge.
SIMPLIFIED TESTINGQuickly test generator starting battery health and identify potential battery problems before they occur. The CELLTRON™ Genstart Battery Tester is capable of testing individual 12V batteries that are in series, parallel, or series/parallel configurations to verify the charge and state of health of the batteries compared to the battery rating.
.
BATTERY TYPE
Compatible with multiple pre-loaded battery types including Lead Acid, AGM Spiral, AGM Flat Plate, and Optima Redtop®.
RATING UNITS
Handles multiple battery rating systems including CCA, EN, SAE, JIS, DIN and IEC.
BATTERY RATING
Battery rating entered by the user.
BATTERY TEMPERATURE
Record the battery temperature with the integrated infrared temperature sensor.
RESULTS
The present state of battery available capacity or remaining service life relative to rated capacity or specifications.
STATE OF CHARGE
The level of charge of the battery relative to its capacity presented as percentage points (0% = empty, 100% = full).
ALL-IN-ONE HARDWAREThe CELLTRON™ Genstart Battery Tester kit includes a protective rubber boot, 10ft cable set with clamps, lead stud adapter set, thermal paper roll, 2GB SD memory card, and a carrying case.
INTEGRATED THERMAL PRINTER
On-the-spot results printing.
TEMPERATURE SENSOR
Integrated infrared temperature sensor with a range of -28 °C to +93 °C (-20 °F to +200 °F).
QUICK CONNECT CLAMPS
10 foot cable with heavy duty piranha clamps.
SD MEMORY CARD SLOT
Spring-loaded data card slot for test data storage and software upgrades.
RUBBER BOOT
Made of heavy duty rubber to effectively prevent damage and provides extra grip.
LEAD STUD ADAPTERS
Includes two male and two female adapters.
-
Applications
- Generator Starter Battery
- Automotive Battery
- 12 & 24 Volt Battery Pack
- Test each individual 12V battery that are in series, parallel, or series/parallel configurations
Battery Chemistries
- Optima Redtop®
- Flooded Lead Acid
- AGM Spiral
- AGM Flat
Rating System / Range
Uses conductance based technology to display test results in the specified battery rating.
- CCA / 100 – 3000
- JIS / By JIS number
- DIN / 100 – 1000
- SAE / 100 – 3000
- IEC / 100 – 1000
- EN / 100 – 3000
Display
- 128 x 64 pixel graphic, backlit display
Test Leads
- 10ft HD Dual Connector Kelvin Clamps
Power Requirements
- Uses the power of the battery under test and 6AA internal batteries
Languages
- English
- French-Canadian
- Spanish
- Portuguese
- Polish
- Italian
- Dutch
- German
Housing Material
- ABS plastic
DC Voltage 0.9 - 32.0 Volts DC +/- 0.03VDC Measured Temperature -20 to 200°F 1.0%+/-5° (-28 to 93.3°C) OperatingTemperature 32 to 120°F (0 to 49°C) Dimensions 9.5in x 4in x 2.5in
(242mm x 102mm x 64mm)Weight 1 lb (427 g) -
CAPACITY MANAGER
- Manage time & capture voltage at prescribed intervals
- Offers effective trend analysis
- Determine the state-of-health on generator batteries
- Full DC string voltage and AC voltage testing
- Celltron Advantage Software: Site Builder & Battery Library Creator
- Digital Amp Clamp / Meter
- Large Carrying Case
- 8 Foot Long Duraprobes for 6 & 12 Volt Batteries Only
- Duraprobe Replacement Kit
- Replaceable Duraprobe Waffle Tips
- 30 inch Probe Extenders
- 8 Foot Long Duraclamps for 6 and 12 Volt Batteries Only
- 4 Foot Long Interchangeable Cables
- Red and Black Lighted Piranha Clamps
- Red Lighted Piranha Clamp
- Black Lighted Piranha Clamp
- Red and Black Lighted Probes
- Red Probe Replacement, Celltron Advantage
- Black Lighted Probe
- 7.2V NiMH Rechargeable Battery Pack
- Desktop Rapid Battery Charger
- Universal, In-Unit Battery Charger
- 39” USB A/B cable
- Thermal IR / RS232 Printer
- Power Adapter / Charger for Thermal IR Printer
- Printer Paper for the CA087 Printer
- 4GB USB Flash Drive
- Celltron Advantage Reporting Software
-
CELLTRON GENSTART DATASHEET